Where is the console port on a Cisco switch?
Every Cisco router or a switch has a console port (also known as the management port) on its back side.
How do I connect a Cisco switch to a console port?
Step 1 Locate the console port on the back of the Router/Switch. Step 2 Connect the console (or rollover) cable to the console port on the Router/Switch. Step 3 Use the correct adapter to connect the other end of the cable to your terminal or PC.
What is console port in switch?
The console port is used to connect a computer directly to a gigabit Ethernet switch and manage the switch since there is no display device for the switch. In most cases, it is the very first step to configure your network switch. Here are the detailed steps of logging in to a network switch via the console port.
How do you console into a Cisco router?
Access Router Command Line Interface
- Under Category, choose Session.
- Under Connection type, choose Serial.
- In the Serial line, enter the COM port on your laptop that is connected to the console port on your router, using the console cable.
- Click Open.
What is the difference between console port and management port?
the console port is for serial management. Usually directly to your laptop or via an console server. The management port is a physical port which can be assigned an IP either via DHCP or static for out-of-band management of the switch.
How does PuTTY connect to console port?
1) After downloading PuTTY, connect the console cable with Cisco Router or Swtich, double click putty.exe to execute it. Expand Connection > Serial. Enter the port number inside “Serial line to connect to” text box. The port number is COM4 in below example.
What is the functions of a console port?
Console ports (serial ports for the control of network equipment) are critical ports. They are designed to input the operational commands and to output messages including those about equipment failures and errors.
How do I connect my computer to my router port?
Steps as follows: Plug the serial DB-9 end of the console cable into the serial DB-9 port on your laptop. If your laptop has no serial DB-9 port, plug the serial DB-9 end of the console cable into the serial DB-9 end of a USB to serial DB-9 adapter and then into a USB port on your laptop.
Which port on switch connects to Router?
An Ethernet cable can be used to connect the uplink port on a router to the uplink port on a switch to expand a network. As an example, a router may only contain 5 Ethernet ports, whereas the switch has 24. Connecting both devices together using the uplink port provides a total of 29 Ethernet ports.
Is console a management port?
Which two ports are typically used for device management?
Device management typically uses the console port and the storage port.
Is PuTTY a HyperTerminal?
PuTTY can replace HyperTerminal for serial communications. It provides logging, a large scroll back buffer, and many other features. You are probably already using PuTTY for SSH and Telnet, but you can also use it for Serial TTY console connections.
Where is the console port on Cisco Catalyst 3750-X?
Note If you have stacked Catalyst 3750-X switches, connect to the 10/100 Ethernet management port or console port of one of the stack switches. You can perform the initial configuration for the entire stack on any switch in the stack. Use one of these options to access the CLI: The RJ-45 console port is on the rear panel of the switch.
How to connect a console port to a Cisco 3850?
1 Connect the RJ-45-to-DB-9 adapter cable to the 9-pin serial port on the PC. Connect the other end of the cable to the switch console port. 2 Start the terminal emulation program on the PC or the terminal. 3 Configure the baud rate and character format of the PC or terminal to match the console port characteristics:
What’s the password for the Cisco 3750 x switch?
The password can be from 1 to 25 alphanumeric characters, can start with a number, is case sensitive, allows embedded spaces, but does not allow spaces at the beginning or end. In the Confirm Switch Password field, enter your password again. Note You must change the default password, cisco.
Where is the console port on a catalyst switch?
The RJ-45 console port is on the rear panel of the switch. Step 1 Connect the RJ-45-to-DB-9 adapter cable to the 9-pin serial port on the PC. Connect the other end of the cable to the switch console port. Step 2 Start the terminal emulation program on the PC or the terminal.