What is Tcont?
A Transmission Container (T-CONT) is an ONU object representing a group of logical connections that appear as a single entity for the purpose of upstream bandwidth assignment on the PON. For a given ONU, the number of supported T-CONTs is fixed.
What is DBA in OLT?
The Dynamically Bandwidth Assignment (DBA) monitors the PON congestion in real time. The OLT dynamically adjusts the bandwidth according to the congestion status, current bandwidth utilization, and configurations. Bandwidth can also be allocated in static mode, or fixed mode.
What is GEM port in GPON?
A GEM port identifies a virtual service channel on the GPON line between the OLT and the ONU, that is, a channel that carries the service stream. It is similar to the virtual path identifier (VPI) /virtual channel identifier (VCI) of the asynchronous transfer mode (ATM) virtual connection.
What are the functions of a T-cont?
T-CONT is short for Transmission Container. It is a container for holding data to e transmitted upstream. Multiple GEM frames to be transmitted upstream are encapsulated into the corresponding T-CONT.
What is DBA profile?
Your responsibility as a database administrator (DBA) will be the performance, integrity and security of a database. You’ll be involved in the planning and development of the database, as well as in troubleshooting any issues on behalf of the users. users access data concurrently, in a form that suits their needs.
What is a DBA profile?
Your responsibility as a database administrator (DBA) will be the performance, integrity and security of a database. You’ll be involved in the planning and development of the database, as well as in troubleshooting any issues on behalf of the users. data remains consistent across the database. data is clearly defined.
What is purpose of DBA profile in GPON?
With the increase of bandwidth utilization, one GPON port can connect more subscribers. The DBA mechanism dynamically adjusts the bandwidth so that subscribers can obtain a bandwidth higher than the maximum fixed bandwidth, thereby enjoying better services.
What is the main job of DBA?
Your responsibility as a database administrator (DBA) will be the performance, integrity and security of a database. You’ll be involved in the planning and development of the database, as well as in troubleshooting any issues on behalf of the users. You’ll ensure that: data remains consistent across the database.
What are the function of DBA?
Database administrators (DBAs) use specialized software to store and organize data. The role may include capacity planning, installation, configuration, database design, migration, performance monitoring, security, troubleshooting, as well as backup and data recovery.
How is a genetic profile obtained?
Chemicals are added to break open the cells, extract the DNA and isolate it from other cell components. Often only small amounts of DNA are available for forensic analysis so the STRs at each genetic locus are copied many times using the polymerase chain reaction (PCR) to get enough DNA to make a profile.
What are the characteristics of the T-CONT type?
Each T-CONT bandwidth type has specific QoS characteristics, which are mainly classified into fixed bandwidth, assured bandwidth, assured/maximum bandwidth, maximum bandwidth, and hybrid mode. The fixed bandwidth is reserved for specific ONUs or specific services on ONUs.
What does T-CONT stand for in GPON system?
In the upstream direction GPON system also utilizes T-CONTs (Transmission Containers) corresponding to allocated timeslots within TDMA multiplexing existing in GPON. Upstream user traffic (Ethernet frames) is encapsulated into GEM Ports and then into T-CONTs.
How is tcont used to configure a ont?
The tcont command is used to configure a T-CONT and bind a DBA profile to the T-CONT. The T-CONT is the physical resources of the ONT. A T-CONT can allocate bandwidth only after it is bound to a DBA profile.
Is the word Cont an abbreviation or a contraction?
What you get isn’t an abbreviation, but it is a contraction. Con’t, on the other hand, mixes the rules of abbreviations and contractions. It lacks more than half of the letters of the original word, and it has an apostrophe in an inappropriate place. You should avoid using it.