What does a truckload of gravel cost?
Bulk Pea Gravel Prices
| Amount | Cost |
|---|---|
| Ton | $10 – $50 |
| Cubic yard | $15 – $75 |
| Truckload (25 tons) | $250 – $500 |
| Bag (0.5 cubic feet) | $4 – $6 |
How much will a dump truck load of gravel cover?
Understanding Size and Coverage Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.
How many square feet will a truckload of gravel cover?
A ton of gravel will cover approximately 100 square feet, 2 inches deep.
How many pounds is a truckload of gravel?
Typically sand and gravel weigh approximately 1500 pounds (3/4 of a ton) per scoop (1/2 cubic yard). One cubic yard (2 scoops) will weigh about 1.5 tons (3000 lbs.). Soils typically weigh a little less, approximately 1000-1200 pounds per scoop.
How much does a 50 lb bag of gravel cover?
A 50-pound bag of pea gravel is equivalent to 0.5 cubic foot, so two 50-pound bags cover 1 cubic foot. Knowing that a 50-pound bag of pea gravel averages 0.5 cubic foot makes the calculation easy — and one most smartphone calculators can complete.
What is the best size gravel for a driveway?
A commonly used gravel size for driveway base layers is #3 gravel. This rock is generally 1-2 inches in diameter and does double duty by establishing a solid, reliable foundation and providing adequate drainage; both critical factors in driveway construction.
How do I calculate how much gravel I need?
Measure the length and width of your driveway in feet. Multiply the length by the width to get surface area and divide the result by three because 4 inches is 1/3 of a foot. You now have the volume of gravel needed in cubic feet. Divide the volume in cubic feet by 27 because there are 27 cubic feet in a cubic yard.
What is #2 gravel?
This primarily 1″ crushed, washed gravel with a top size of 1-1/2″ is often used for drainage around perforated pipe, under concrete slabs, and as a coarse driveway topping for soft, very muddy driveways.
How much does a 25kg bag of gravel cover?
For Decorative Gravel As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm.
How much gravel do I need to cover 200 square feet?
If the area to be covered is 200 cubic feet, for example, each bag of rock covers 4 cubic feet ,so you will need 50 bags of landscape rock to fill the space.
How much gravel can a full size truck hold?
Full-size Pickup Trucks: Can usually handle 2 cubic yards of soil, 2-3 cubic yards of mulch, and 1 cubic yard of stone or gravel. Then, how many tons of gravel will fit in a dump truck? A dump truck can hold anywhere from 13 to 25 tons of gravel, based on common sizes available for commercial use.
How much does a truckload of topsoil cost?
Bulk topsoil costs $10 to $50 per yard depending on the amount, moisture content, delivery fees, and quality of materials. A 10 to 15-yard dump truck load of topsoil costs $150 to $500 for delivery, and a ½-yard scoop runs $10 to $30 for pickup. For smaller projects, topsoil costs $2 to $6 per bag or about $35 to $120 per yard .
How much gravel is save to haul in a truck?
In general, the maximum quantity per truckload is 12 cubic yards of stone, 15 cubic yards of topsoil, and 22 cubic yards of mulch. When it comes to gravel, an ideal average is about 3,000 lbs per yard . A dump truck (pickup truck sized) can carry 1 yard and three-axle dump truck can carry about 16.5 yards of gravel.
How much does a truck load of concrete cost?
Full Truck Load of Concrete Cost One full truckload of concrete is about 10 cubic yards and costs between $1,169 and $1,444 depending on the PSI mix. Anything less than a full truckload is considered a short load which adds $53 per cubic yard to your final price. Bulk Concrete and Price Per Ton