How do you plot gain of antenna in HFSS?
In HFSS go to HFSS tab> Results> Create Far Filed report> Rectangular Plot>select trace tab> Prime Sweep: select Freq> select Gain > select dB> go to familes tab > select Theta=0 and Phi=0 >then click New Report.
How do you make a microstrip patch antenna?
Using the equations mentioned above, a square microstrip patch antenna is designed at a resonant frequency of 2.4 GHz. The length width (W) and length (L) of the patch at a resonant frequency of 2.4 GHz is found to be 38 mm while the feeding offset position is 6 mm. the height of the substrate is 3 mm.
How do you find the radiation pattern in HFSS?
In HFSS go to HFSS tab> Results> Create Far Filed report> Radiation pattern> select trace tab> select directivity > select DirPhi and DirTheta > select dB> go to familes tab and select phi=0 (for E- Plane) or phi=90 (for H-Plane) > then click New Report.
How do you plot radiation efficiency in HFSS?
look for infinite sphere.. – click on infinite sphere..then click “compute antenna parameters”. Open HFSS of your design and simulate,then go to result and follow the procedure. Results>create far field>rectangular plot>antenna parameters>radiation efficiency >absolute.It must be frequency Vs Radiation eff.
What are the main parts of a microstrip patch antenna?
The Microstrip Patch Antenna is a single-layer design which consists generally of four parts (patch, ground plane, substrate, and the feeding part). Patch antenna can be classified as single – element resonant antenna. Once the frequency is given, everything (such as radiation pattern input impedance, etc.) is fixed.
What are the major components of microstrip patch antenna?
Microstrip patch antenna is having four basic components in it and they are microstrip patch, dielectric substrate, ground plane and feed [1].
Is Ansys HFSS free?
Ansys Electronics Desktop Student offers free access to the industry gold-standard Ansys simulators for work with antenna, RF, microwave, PCB, IC and IC package designs, along with electromechanical devices such as electric motors and generators.
How do you start HFSS?
HFSS Information. Once the client comes up, go to start and go to ANSYS menu GO to Workbench and within Workbench click HFSS. Once there, click on Geometry (or someting else in the menu of the HFSS) and then the Electronics Desktop will open up. That is HFSS!!!