How do you light a pilot on a wall heater?
How to Turn On a Wall Heater
- To turn on your gas heater, locate the knob for starting.
- Turn the knob to “Pilot,” and then push down on the “Ignite” button.
- Once the pilot light comes on, hold down the Ignite button for 10 to 15 seconds.
- Set the temperature on the wall heater to your desired heating level.
Where is the pilot light on a wall heater?
In some heaters, it is easy to locate the pilot light, as it is just behind the heater vent. For others, you will have to open the cover of the burner area or remove it altogether, then follow the gas connection from the main gas supply to the pilot light. The pilot light is inside the heater, behind a metal plate.
Why won’t the pilot stay lit on my wall heater?
A pilot that won’t stay lit could be the result of a blockage in the pilot tube. Turn off the gas, clear the tube with compressed air, and relight the pilot. If that doesn’t work, you may need to call a repairman to come and install a new thermocouple.
Will gas leak if pilot light goes out?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
How do you light a pilot on a gas wall heater?
Steps For Safely Lighting a Gas Wall Heater Have a match or long lighter available to light the pilot. Find the valve located in the heater and turn it to “Pilot”. Press inward on the valve. You should hear a hissing sound coming from the valve. Release the valve and light your match. Press the valve down again and place the match up to the valve.
Locate tube that supplies the pilot light. This is a 1/4 inch metal tube that originates near the main valve and extends upward. You may need a flashlight to locate the orifice, which is usually situated behind a metal plate with an inspection hole in it.
What if your wall heater pilot light keeps going out?
5 Reasons Why Your Pilot Light Keeps Going Out Faulty Thermocouple. If your pilot light won’t stay lit, the thermocouple is very likely the culprit. Pilot Orifice is Dirty. If you can manage to get the pilot light lit for just a moment, inspect the flame. Bad Gas Regulator. Fluctuating Natural Gas Availability Based on Demand. Improper Air Flow, or a Strong Draft, Blows the Pilot Out.
Do all gas fireplaces have a pilot light?
Most gas fireplaces have a standing pilot light, which is a small flame that burns even when you aren’t using the fireplace. This makes the fireplace easy to start when it’s cold outside, but when it warms up, it’s a good idea to shut off the pilot to conserve gas.