How do I disarm my DSC alarm?
How Do I Disarm My DSC Alarm System?
- Disarm from the panel. To disarm from the panel, simply enter in a valid user code or the Master Code.
- Disarm with a key fob. To disarm using a key fob simply press and hold the disarm button on a programmed key fob while within range of the system.
- Disarm through Alarm.com.
How do I reset my DSC alarm?
Certain sensors, after having detected an alarm condition, require a reset to exit the alarm condition (i.e. glass break sensors, smoke detectors, etc.). To reset the detectors, press and hold the Reset key for two seconds or press *72. How to set the date and time on the keypad.
How is DSC alarm diagnosed?
How to Troubleshoot Problems on the DSC Home Security System
- Press the pound key (#) to stop the security system from repeatedly beeping.
- Press the star key (*) and then press the number 2 key.
- Check the home phone lines for a dial tone if 3 or 4 is lit up or displayed.
How do I disarm my alarm without code?
Access the Main Control Panel of Your Alarm System
- Remove the AC power to the home alarm console from the wall directly.
- Use your console’s access key (or another item such as a small screw) to unlock and open the system’s backing.
How do I stop my DSC alarm from beeping when power goes out?
If it displays “low battery” and you have recently experienced a power outage, simply wait 24-hours after the power comes back on for the battery to recharge. If the beeping keeps on beeping and beeping, however, you’ll probably have to replace the battery.
Why is my DSC alarm system beeping?
The culprits may be a low battery (1), bell circuit (2), system trouble (3), system tamper (4), module supervision (5), RF jam detected (6), PC5204 low battery (7), or PC5205 AC Failure. If the beeping keeps on beeping and beeping, however, you’ll probably have to replace the battery.
What does trouble mean on DSC alarm?
The trouble light is an indication that something is not functioning properly on your DSC security system. When a trouble is present the system trouble indicator light will illuminate and the keypad will beep every 10 seconds. To silence the trouble beep simply press the # key on the keypad.
How does DSC alarm system work?
Your DSC Security System is made up of a DSC control panel, one or more keypads and various sensors and detectors. The control panel, which is a metal cabinet, will be mounted out of the way in a utility closet or in the basement. The metal cabinet contains the system electronics, fuses and back up battery.