How do I change the battery in my Ironman Triathlon watch?
How to Replace Battery on Timex Ironman Triathlon Watch
- Step 1: Unscrew the four phillips screws on the back of the watch.
- Step 2: Remove the back.
- Step 3: Remove the battery cover screw and lift off the battery cover.
- Step 4: Insert a new battery into the watch.
- Step 5: Reinstall the battery cover.
What battery does a Timex Ironman Triathlon watch take?
Most start with the letters “CR.” For example, the Ironman Fitness Trainer takes a CR2032 battery. The T62962 Ironman Triathlon 8-Lap Shock Resistant Watch uses a CR2016 battery.
How long do Ironman watch batteries last?
(Pocket-lint) – Timex has launched an all-new Ironman watch, and this one is a smartwatch with GPS, heart-rate monitoring and battery that can last up to an impressive 25 days.
What battery is equivalent to CR1216?
CR1216 can be replaced with a BR1216 battery (non-rechargeable carbon-monofluoride lithium battery) which features a slightly lower (on average 2.8 vs 3.0 volts), but more stable voltage during the use, and lower discharge current – hence, the BR1216 battery should NOT be used with watches that feature an alarm, LED …
What is the difference between CR2016 and CR2032?
CR 2032 has a capacity of 240 mAh, while CR2016 has a capacity of just 90 mAh. The CR2032 can provide 10 hours of use, while you only get about six hours from the CR2016, depending on the power you’re using, of course. Due to their equivalent voltage, there are several cases where CR2016 and CR2032 can be interchanged.
How much battery does Indiglo use?
The watch has only a small 1.5-volt battery.
Does Indiglo wear out?
Indiglo watches take energy from the watch battery and give it to the atoms in the zinc sulfide-copper compound. This energy is then given off as light. People say that this Indiglo effect does wear out after long use, however.
Can you use a 2032 battery in place of a 2025?
Intro: 2032 and 2025 are literally the dimensions of the battery. A 2032 is 20mm in diameter, 3.2mm thick, and a 2025 is slightly thinner, at 2.5mm thick. They usually both have the same voltage (3V), and assuming they fit in the case, they are interchangeable.