Does Sub-Zero Panel Ready Refrigerator come with handles?
Answer: Any handle can be used on custom panels on a Sub-Zero product. Units ordered framed or stainless steel (/F, /S) come with handles. Stainless steel flush inset panels come with handles.
How do you tighten the door handle on a Sub-Zero refrigerator?
Handle Only Is Loose
- Tighten the set screw on the bottom of the handle standoff with a 3/32″ Allen wrench.
- A small amount of blue thread locking Loctite may prevent the set screw from loosening in the future.
- Be careful not to over-tighten the set screw, as the thread is very fine.
What is a tubular handle?
Tubular handles are characterized by their solid yet attractive design. The product series also includes round and oval cross-sections, angled and beveled gear lever handles, as well as various ledge handle shapes.
What Sub-Zero do I have?
The product rating information is inside the cabinet to the left of the freezer drawer. The product rating information is inside the cabinet, in the upper left area of the unit. On the compartment divider, directly behind the kickplate. May be on the ceiling inside the unit or on the underside of the control panel.
What size handles for refrigerator?
The most common sizes of appliance pulls, in order of popularity, are 12”, 18”, 8”, 7” and 15”. Appliance pulls typically mount onto ¾” thick wood panels affixed to the appliance, rather than to the appliance itself. While fridges and freezers are the most common panel-ready appliances, they are not the only ones.
Do panel ready fridges come with handles?
There are a few logistics that must be factored in when purchasing a panel ready appliance. Since fasteners and handles are usually not included, they must be purchased separately. Handles and fasteners can commonly be purchased and installed through your contractor or carpenter.
How long is sub zero warranty?
five years
For five years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, these parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing.
Where is Sub Zero manufactured?
Our products are built in our own Wisconsin and Arizona facilities, where we control every step of the manufacturing process.
Do you put pulls on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
What size handles for cabinets?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.