Why are my rear surround speakers not working?
Verify that the rear surround speakers are properly connected to the Audio/Video (A/V) receiver. Increase the rear speaker volume or surround speaker settings to maximum. Try selecting a different size (small or large) for the rear surround speakers in the menu.
Why are my surround sound speakers not working?
Try different cables to verify this is not a bad set of cables. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. Check each speaker to make sure they are properly connected to the A/V receiver. Perform a Test Tone function to verify if the speakers are working correctly.
Why is my 5.1 speakers not working?
Go to the Playback tab, select your 5.1 surround speakers and click on Properties. Next, go to the Advanced tab and use the drop-down menu below Default Format to change the audio format to 24 bit, 96000 Hz (Studio Quality). Reboot your system and see whether 5.1 channel surround is now working.
How do you fix one speaker not working?
Turn up the volume of the speaker and the connected device. Check that the connected device is playing. Make sure the audio cable is disconnected from the AUDIO IN jack during playback in BLUETOOTH mode. Make sure the audio cable is firmly connected to the AUDIO IN jack during playback in AUDIO IN mode.
How do I test my Onkyo receiver speakers?
To setup your receiver to output the test tone from the speakers, press the Setup button and select Speakers>Manual Setup>Level>Test Tone Star. You can now select and adjust the speakers’ audio level using the “UP, DWN and SIDES arrows” buttons on your remote control.
How do I connect my Onkyo surround sound to my TV?
Just use the HDMI 1 port on the back of your TV. Connect the other end of the cable to your receiver. You’re looking for something labeled HDMI Out; it’s usually a different color. If necessary, connect a digital optical cable to the back of your TV (optical out), and the other end to your receiver (optical in).
How do you troubleshoot speaker wires?
How to troubleshoot for faulty speaker wires and connections.
- Turn off the Audio/Video (A/V) receiver.
- Disconnect all of the speaker wires from the rear of the A/V receiver.
- Make sure that the speaker connection and speaker wire are not damage or pinched.
- Power on the A/V receiver.
- Power off the A/V receiver.
How do I fix my stereo speakers not working?
How to Fix a Stereo Receiver That’s Not Making Sound
- Check the power. Ensure that all plugs are firmly seated in their respective sockets because sometimes a plug can slip out halfway and not draw power.
- Check the speaker/source selection.
- Check the speaker wires.
- Check the speakers.
- Check the source components.