Where is the reset button on an Armstrong furnace?

Where is the reset button on an Armstrong furnace?

Almost every furnace has a reset button, which is typically located inside the blower housing next to the blower motor.

How do you reset a furnace blower?

How to Find and Reset your Furnace Motor Blower

1. Step 1: Turn off the power to the furnace.
2. Step 2: Remove the blower compartment cover.
3. Step 3: Make sure the blower is completely cooled off.
4. Step 4: Locate the reset button.
5. Step 5: Press the button in (assuming that this is your issue and that the button has popped).

How do you reset a gas furnace?

Follow these simple steps:

1. First, turn off the power supply to the furnace by turning off the breaker in the circuit box.
2. Locate the reset button on the furnace and press it to reset the furnace.
3. If the button is popped up, press it down.
4. Return the cover to the blower compartment and turn the power on.

Why is my gas furnace not kicking on?

If your furnace is not kicking on, it can be an issue with the thermostat. You should first make sure that the thermostat is switched to the heating function. You may also have an internal problem with your thermostat, which needs to be repaired by a professional.

How do you reset a furnace after overheating?

How to Reset Your Furnace

1. Turn down the thermostat to its lowest setting.
2. At the circuit breaker, turn off the power to the furnace.
3. If this is a gas furnace, turn off the gas supply at the valve for the main gas pipe, but leave the pilot’s gas supply on.
4. If the pilot light was out, light a match to relight it.

How do you know if your furnace blower motor is bad?

What Are Signs Your Blower Motor Needs to Be Replaced?

1. Poor or Airflow from Air Vents. This will be the first and most obvious sign your blower motor has a problem.
2. No Airflow At All From Vents.
3. Skyrocketing Energy Bills.
4. Strange Noises When You Turn on the Heat.
5. Overheating Blower / Weird Smells.

What does blinking red light on furnace mean?

If you see the red flashing light during regular operation, this usually means that the outdoor unit was shut off due to a problem and is currently “locked out” from normal operation. When you see the red flashing light, it is usually in a diagnostic feature to alert the HVAC repair technician to what the problem is.

What does a blinking green light on a furnace mean?

When the green light is flashing fast, it means you have got a working blower system and your furnace is providing heat to the home. If the green light is flashing slowly, it means the furnace is on but there is no request for heat. A continuous light likely means that the IFC circuit board needs replacing.