What is basic rate WiFi?
What is Basic Rate? The Basic Rate setting is not actually one rate of transmission but a series of rates at which the Router can transmit. The Router will advertise its Basic Rate to the other wireless devices in your network, so they know which rates will be used.
What is Association roam preference?
Association Roam Preference: When a specific band (2.4GHz or 5GHz) is preferred, this would maintain your preference with dual-band access points that use the same SSIDs for both bands.
What is afterburner WiFi?
Afterburner technology is an enhancement for the 54g™ platform, Broadcom’s maximum performance implementation of the IEEE 802.11g standard. Products with this new technology provide up to 40 percent greater throughput than typical standard 802.11g systems without impacting the performance of neighboring wireless LANs.
What is the best RTS threshold setting?
The recommended standard of the RTS threshold is around 500. A low threshold implies RTS packets are transferred more frequently and the throughput of the packet is on the lower side.
What is a good data rate for WIFI?
A good internet speed is at or above 25 Mbps. These speeds will support most online activity, such as HD streaming, online gaming, web browsing and downloading music.
What is 40mhz intolerant?
40 MHz Intolerant bit allows ANY device to indicate to an AP that it may not operate in 40 MHz anywhere in the 2.4 GHz band.
What is WiFi rekeying offload?
Whether you call it Wi-Fi offload(ing), mobile data offloading, 3G data offloading or just offloading, it is all about relieving the congested mobile data networks with additional capacity from unlicensed Wi-Fi spectrum.
What kind of Technology is the Xpress technology?
From Wikipedia, the free encyclopedia Xpress technology is Broadcom ‘s standards-based frame-bursting approach to improve 802.11 wireless LAN performance. It is a software -based implementation of the frame-bursting originally in the IEEE 802.11e draft specification, and is found in the Wireless Multimedia Extensions (WME) specification.
What is the purpose of the Broadcom Xpress technology?
What is Xpress Technology? Tags: Broadcom. Broadcom’s Xpress Technology is one of the older performance-enhancing WiFi technologies, designed to improve wireless network efficiency and boost throughput. It is more efficient in mixed environments, and it can work with 802.11a/b/g networks. When Xpress is turned on, aggregate throughput (the sum
How does Xpress work in a mixed network?
It is more efficient in mixed environments, and it can work with 802.11a/b/g networks. When Xpress is turned on, aggregate throughput (the sum of the individual throughput speeds of each client on the network) can improve by up to 27% in 802.11g-only networks, and up to 75% in mixed networks comprised of 802.11g and 802.11b standard equipment.
What is the difference between Xpress and Prism Nitro?
It is one of the early enhancement technologies designed for 802.11 but it was preceded by Intersil ‘s Prism Nitro and Atheros ‘ Super G. Nitro was able to improve speed 3 times while Xpress posted 6 times improvement in mixed mode condition. ^ “What is Xpress Technology?”.