What is a Latrolet?
Latrolet that is used for taking branch which is not at 90 degrees to run pipe. Latrolet comes in a 45°or any other special degree as required by purchaser. End connections of a Latrolet can be butt welded, socket welded or threaded.
What is difference between Nipolet vs weldolet?
Nipolet is a one piece fitting for valve take-offs, drains and vents. Nipple Olets are known as branch connection fittings used to provide an outlet from a larger pipe to a smaller one. Nipolet uses the fundamental Weldolet however the branch affixes by method for an attachment inside the olet.
What is the difference between a weldolet and an Threadolet?
The mainly differences are the connection surface, weldolet ends in plain or beveled to weld on the the branch pipe, sockolet ends in socket type that to insert branch pipe. Threadolet is insert branch pipe and with screw connection. Weldolet: Compatible with higher pressure and simple connection, cost lower.
What is a OLET weld?
Weldolet®, an economical butt-weld branch connection, is designed to minimize stress concentrations and provide integral reinforcement. manufactured to meet your specific reinforcement requirements.
Why is Weldolet used?
Weldolets are used to provide an outlet area from a larger to a smaller pipe connection point. The weldolet is welded to the larger pipe (the run) and connected to the smaller pipe (the branch).
What is a half coupling?
Half Coupling is used for small bore branching from a vessel or large bore pipe. It can be threaded or socket type. It has a socket or thread end on only one side. A socket weld half coupling can be directly welded to large bore pipe, to make a branch connection.
Why is weldolet used?
What is a Sockolet used for?
The sockolet (socket weld outlet) is mainly used for the reinforcing pipe fittings connected by the branch pipe, instead of using the branch pipe type such as the reducer, the reinforcing plate and the reinforcing pipe section, it is safe and reliable, reduces the cost, simple construction, improves the medium flow …
How do I choose a weldolet?
A weldolet is designated by the run length by the branch length. For example a 6-inch weldolet on a 10-inch pipe would be a 10×6 Weldolet. A weldolet is designed to minimize stress concentrations and provide integral reinforcement without the need for reinforcing the weld.
What is the difference between full and half coupling?
Differences between Full Coupling and Half Coupling The full coupling has both ends of threaded or socket welded connection but the Half coupling is only threaded or socket weld at one end, and the other end is welded type.
Is a coupling a fitting?
Couplings are pipe fittings that help to extend or terminate pipe runs. These fittings are also used to change pipe size. It’s also used to repair a broken or leaking pipe. Most pipe installations require several lengths of pipe to be joined together or cut to facilitate changes in direction and crossing of obstacles.
What is a female pipe coupling?
A Pipe Coupling, used in piping or plumbing, is a very short length of pipe or tube with either socket or female pipe threads at one or both ends that allows two pipes or tubes of equal or different sizes to be joined together. These fittings are also used to change pipe size.
When to use an elbolet instead of a weldolet?
Elbolets are used with 90 or 180 degrees long radius and short radius (more rarely) elbows for thermowell and instrumentation connections or as a drain connection when there is too little space for using a Weldolet.
What kind of branch fitting is elbolet used for?
Elbolet is type of self-reinforced branch fitting developed by Company called Bonney Forge. It is used on Long Radius Elbow for instrument connection such as thermowell. Elbolet is available in Threaded end, Socket type (Class 3000 and Class 6000) and Butt type end with Standard Weight, Extra Strong and Double Extra Strong (Schedule 160).
What kind of connection is a latrolet used for?
Latrolet that is used for taking branch which is not at 90 degrees to run pipe. End connections of a Latrolet can be butt welded, socket welded or threaded.
How is elbolet used in the real world?
Elbolet is used widely abroad in recent years, It is used to connect the reinforced fittings. It takes place of traditional connecting ways. The body of Elbolet is made in excellent Forgings. Elbolet packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.