What is a 9 pin serial port?
Many early PC designs used DB9 serial ports to communicate with other computers or hardware devices. This 9-pin layout become a de facto hardware standard that enabled device manufacturers to create products that worked on a wide range of computer platforms.
Which is pin no4 in RS232 DB-9 connector?
RS232 uses serial communication protocol where data exchange is done bit by bit. Although RS232 is later replaced by faster USB (Universal Serial Bus) it is still popular in some areas. RS232 used to have 25 pin, now it is shrunk to just 9 pin.
Is serial port male or female?
Gender. Generally, serial port connectors are gendered, only allowing connectors to mate with a connector of the opposite gender. With D-subminiature connectors, the male connectors have protruding pins, and female connectors have corresponding round sockets.
Is RS232 DB9?
Below is the pinout of a typical standard male 9-pin RS232 connector, this connector type is also referred to as a DB9 connector. A computer’s serial COM port (DTE) is usually a male port as shown below, and any peripheral devices you connect to this port usually has a female connector (DCE).
What is male female port?
A male connector is commonly referred to as a plug and has a solid pin for a center conductor. A female connector is commonly referred to as a jack and has a center conductor with a hole in it to accept the male pin.
How many pins are in a serial port?
Serial ports consist of two signal types: data signals and control signals. To support these signal types, as well as the signal ground, the RS-232 standard defines a 25-pin connection. However, most PC’s and UNIX platforms use a 9-pin connection.
What is a RS232 port used for?
An RS-232 serial port is most often used by repair technicians to perform diagnostics and service updates. It may also be used to control a device when connected to a computer running a home automation system or Custom Integrated Audio/Video (A/V) system, such as the CAV-M1000ES Multi-room A/V Distribution System.