Helpful tips

What driver do I need for HP LaserJet 1018?

What driver do I need for HP LaserJet 1018?

Answer: HP Laserjet 1020 driver will work for hp 1018 printer as well, so you can easily use it. If it didn’t work in your case, then download the hp laserjet 1018 basic driver and install it manually on your computer.

How do I print on HP LaserJet 1018?

HP LaserJet 1018 and 1018s Printers – Setting up the LaserJet (…

  1. Unpack the printer and check the contents.
  2. Remove the packing tape and install the paper guide.
  3. Install the print cartridge.
  4. Connect the power cord.
  5. Turn on power.
  6. Load plain paper.

How do I reset my HP Deskjet 1018?

Solution two: Restart the printer

  1. Press the Power switch to turn off the product.
  2. Disconnect the power cord from the back of the product.
  3. Disconnect the USB cable ( ) from the back of the product.
  4. Wait about 30 seconds.
  5. Reconnect the USB cable to the back of the product.

How can I download printer driver?

Make sure your printer is on and connected to your PC. Open Start > Settings > Devices > Printers & scanners. Select the name of the printer, and then choose Remove device.

How do I install HP Laserjet driver on Windows 10?

In Windows, search for and open Control Panel. Click Devices and Printers, and then click Add a printer. On the Choose a device or printer to add to this PC window, select your printer, click Next, and then follow the on-screen instructions to install the driver.

How do I clean my HP LaserJet 1018 printer?

Load the transparency or paper in the input tray. Print a cleaning page….Print a cleaning page.

  1. Access the product Properties dialog box.
  2. Click the Configure tab.
  3. In the Cleaning Page section, click Start.
  4. Click OK to begin the cleaning.

How do I restore my HP printer to factory settings?

1 Restore Defaults

  1. From the screen on your printer, navigate to Setup.
  2. Tap Tools.
  3. Tap Restore Defaults.
  4. Tap Yes.
  5. The printer will restart.
  6. Once restarted, your printer will have been reset to factory default settings.

What is the default password for HP printer admin?

Open a web browser and type the printer IP address in the address field exactly as it appears on the Configuration Page, and then press Enter. Click the Security tab, and under General Security, set the local administrator password. Keep the username default as admin. Type the New Password and Verify Password.

Which is the driver for the HP LaserJet 1018?

The package provides the installation files for HP LaserJet 1018 Printer Driver version 2012.918.1.57980. If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version.

How do I set up drivers for my HP printer?

To set up the driver, you will have to turn on both your PC and your HP Laserjet 1018. You want to keep your printer unplugged until you’ve installed the software. Once you’ve done that, you’ll be prompted by the Installer Wizard to connect the device to your computer.

How to get drivers for my hp Z2?

To detect drivers for the PC you have selected, initiate detection from that PC or click on “All Drivers” below and download the drivers you need. Driver detection is temporarily unavailable.