Is 7/8 the same as 22mm?
22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch. 25mm = almost 1 inch.
Is there a 22mm socket?
1/2-inch Drive 22 mm 12-Point Metric Standard Socket is rated 4.9 out of 5 by 10.
How deep is a deep socket?
A deep socket will generally be around one inch long. This will allow you to use a socket wrench in inaccessible places, especially if you have an extension on the driver.
Can I use 22mm Socket 7 8?
GM has been metric since probably the 80’s. If the wheel stud thread spec is metric (which they are: M14 x 1.50) then you can bet the nut that goes on it is metric as well. 22mm socket = 22mm. Therefore using a 7/8″ socket is actually using a socket that is larger…
How much is 15mm in inch?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 15mm | Just short of 5/8 Inch | 0.59055 Inches |
| 16mm | 5/8 Inch | 0.62992 Inches |
| 17mm | Just short of 11/16 Inch | 0.66929 Inches |
| 18mm | Just short of 3/4 Inch | 0.70866 Inches |
Do they make a 23 mm socket?
TEKTON 3/8 Inch Drive x 23 mm Deep 12-Point Socket | SHD13323.
What size is a 22 socket?
Metric Socket Sizes Chart
| 3/8″ Drive | 1/2″ Drive |
|---|---|
| 22mm | 25mm |
| 26mm | |
| 27mm | |
| 28mm |
What is a deep socket for?
Deep sockets (right image) can reach the nut on a longer, threaded bolt; they also allow you to reach recessed fasteners.
What size socket fits most Lugnuts?
To reduce the chance of damaging the lug nuts, always use six-point sockets, not 12-point, especially with an impact wrench.
How big is a 22mm 1 / 2 socket Socket?
1/2 in. Drive SAE & Metric High Visibility Socket Set, 21 Pc. 1/2 in. Drive SAE & Metric High Visibility Socket Set, 21 Pc. 1/2 in. Drive Metric Impact Deep Socket Set, 10 Pc.
How big is a 22mm deep impact socket?
Hey Rudypro, The entire 22mm 6-Point Deep Socket is 3.2″ long, to the first small step out that should clear a shaft is 2.135″ and from the opening until it hits the drive tool’s anvil is 2.575″. Thanks! Will this drive a 22mm square bolt? I’d rather have a 4-point square socket, but none exists in t…
What kind of steel is a husky impact socket made out of?
Husky 1/2 in. drive Impact Sockets are manufactured from chrome molybdenum alloy steel and designed to withstand rigors of heavy duty use. Size markings have been hard stamped into the sockets for quick and easy identification that will never wear away.