How do I fix F06 error?
How to Fix F06 on a Whirlpool Duet
- Touch “Pause/Cancel” twice to cancel the F06 error on the display.
- Plug the power cord back in and select a new wash cycle.
- Press “Pause/Cancel” twice again if the F06 error code resumes.
What does it mean when your washing machine says F06?
drive motor tachometer error
The “F06” fault code indicates a drive motor tachometer error. This means the control is unable to properly detect motor speed and the machine will shut down. If the failure occurs during high-speed spin, the door will unlock after 3 minutes.
What does F6 mean on a Kenmore washer?
The F6 error code means that the computer on the control didnt detect that the motor reached a high speed on the spin cycle, sometimes it thinks the washer didnt spin fast enough because of a loose wire connection either on the motor or the control boards (motor &machine control) if you find that the washer did …
What does F06 04 mean?
Anxiety disorder due to known physiological condition. 2016 2017 2018 2019 2020 2021 Billable/Specific Code. F06. 4 is a billable/specific ICD-10-CM code that can be used to indicate a diagnosis for reimbursement purposes.
How do I fix Indesit F06 error?
Indesit error F06
- Check if there’s any laundry in the door.
- Put the laundry all the way in the drum.
- Close the door and restart the washing machine.
How do I reset my washing machine?
To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.
How do I fix the F06 fault on my Hotpoint washing machine?
When your Hotpoint washer dryer shows error message F06, you will need to check the door area for any obstructions. Closely inspect the door lock and surrounding areas, removing anything in its way. Once you have cleared any obstructions, try to restart the machine programme.
How do I fix error code F06 Indesit washing machine?
What does F11 mean on a Kenmore washer?
communications problem
F11 is an indication of a communications problem. Communications cannot be sent correctly between the machine control board and the motor control board. Here are some possible causes: Loose wire connection at either the machine control board or motor control board.
How do I get rid of error 30 on my prepaid meter?
Error 30 – Technical error on your meter – please switch your meter off as well as your electricity mains and wait a few minutes. Turn back on and retry the token.
How do I fix f15 error?
This error is almost always caused by a failed motor control unit. Check the wiring between the central control unit and the motor control unit and motor for loose connections or damaged wires. Check the drive belt. If all this looks ok then replace the motor control unit (MCU).