What direction should I point my digital TV antenna UK?
When up with the TV antenna, simply point it in the direction of the television transmitter mast. Obviously, this required the TV transmitter mast to be visible, but if not, it is often possible to align the antenna in the same direction as other local antennas.
What angle should a TV aerial be?
If you are using an aerial with telescopic aerial make sure that the aerials are extended to the maximum length to get the best performance. When using an aerial with two telescopic aerials the best way to start with is positioning them at an angle of 90° away from each other.
How do I know which TV transmitter I am receiving?
To find out which transmitter your aerial gets its signals from, visit our Detailed Transmitter Information page and enter your postcode and house name or number. From here you can see your most likely and alternative transmitters, predicted receptions and distance from your home address.
Why is my digital aerial not working?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.
How do I know if my TV aerial is working?
Test Your TV Aerial Cable Another way to check the TV aerial is to take the TV to a socket that you are sure is working correctly and perform a test. If the TV can get a signal and identify the channels on another socket, you can rest assured that your TV is fine.
Why is my digital antenna not picking up channels?
Some possible fixes for this issue include unplugging the device, checking the connections, and making sure the TV is on the right channel. Adjust the antenna. Moving the antenna a few feet away from the converter box may not make a big difference, but give it a try. If it doesn’t work, relocate the antenna.
Why is my antenna not finding channels?
It is important to check regularly for corrosion, loose cable fittings, or if a cable has been compromised. Try disconnecting the splitter and running the cable directly into the TV/converter box and run a channel scan. If reception improves, a distribution amplifier is likely to be the solution.
How do I know if my TV aerial is working UK?
How do I check if my TV aerial is working?
Another way to check the TV aerial is to take the TV to a socket that you are sure is working correctly and perform a test. If the TV can get a signal and identify the channels on another socket, you can rest assured that your TV is fine.
Why won’t my aerial pick up any channels?
There are lots of things that can go wrong with the aerial cable. These include but are not limited to physically break in the cable, waterlogged cables or cables that have had a very high current run through them, like from an electrical spike, electrical surge or lightning strike.
How does aerial alignment work in the UK?
UK Aerial Alignment will help you align your TV aerial to the most suitable transmitter.Place your phone horizontally and the aerial sketch rotates and points to the most suitable transmitter.View transmitters and your location on a map view and select other transmitters from this view.Select other transmitters from a list.
Is it easy to change the direction of an aerial?
If there is one criticism, it’s locking the direction once you have found it. It is difficult moving your aerial with your phone in one hand and a spanner in the other. Lol. Spent an hour trying to tune the TV in our motorhome last night.
What’s the best way to determine the direction of a TV aerial?
I accept that measuring signal strength at the aerial is the best method especially when an aerial is pointing towards an obstruction such as a building or electricity pylon. In Fig. A Terrestrial TV is transmitted on the UHF frequency band between 300MHz and 3,000MHz .
How is the direction of the aerial on Freeview?
NOTE: In the diagram above the compass needle, pointing to Magnetic North, has been aligned with N (zero) on the dial. Then true north is at 2° on the dial. When my aerial points to the Waltham transmitter the sighting direction is aligned with 104° on the compass dial.